
Zirconia Alumina Tube
Description
Technical Parameters

Product Introduction
Zirconia alumina tube is one of alumina ceramic, Wear resistant ceramic tube full of metal ceramic lined composite pipe, give full play to the steel tube high strength, good toughness, impact resistance, good welding performance and corundum porcelain of high hardness, high wear-resistant, corrosion resistance, good heat resistance, overcomes the low hardness, poor wear resistance and poor toughness characteristics of ceramic. Wear resistant ceramic tubes with wear and corrosion resistance, heat resistance, good resistance to mechanical impact and thermal shock, good solderability performance.
Zirconia alumina tube temperature measuring instrument is a commonly used temperature measuring element in industrial production. Among them, the key core parts are temperature measuring heating wire and insulating protective sleeve. Alumina ceramic insulating protective sleeve has good thermal conductivity and high temperature resistance.
Performance Index
|
Item/Product |
92 |
|
AL2O3 (%) |
≥ 92 |
|
Fe2O3 (%) |
≤ 0.2 |
|
Mohs Hardness |
≥ 9 |
|
Water Absorption(%) |
≤ 0.02 |
|
Bulk Density(g/cm3) |
≥3.60 |
Product Application
Zirconia alumina tube is conveying granular material, grinding, corrosive medium, such as the ideal wear and corrosion resistance, pipelines, widely used in electric power, mining, iron and steel, cement, chemical industry etc..
It is widely used in the production of thermocouples. It plays a key role in protecting the temperature measurement and thermal conductivity wires and increases the service life of thermocouples. The corundum protective sleeve has a sealed round head shape at one end and good compactness. It is generally used in conjunction with an insulating core to form an important temperature measuring element of a thermocouple protection tube.
The manufacturing process of Zirconia Alumina Tube
1, Raw material preparation
+
-
Zirconia raw materials are usually divided into two categories: synthetic zirconia and natural zirconia. Zirconia is synthesized through chemical methods, with high purity and stability; Natural zirconia is derived from natural minerals and has lower purity and stability than synthetic zirconia. When selecting raw materials, synthetic zirconia or natural zirconia should be determined based on the specific requirements of the product.
2, Preparation of mixture
+
-
The preparation of the mixture is a key step in the production of zirconia ceramics, which directly affects the performance and quality of the product. Mixtures are usually made by mixing raw materials such as zirconia, colorants, and fluxes in a certain ratio. The content of zirconia has a significant impact on the melting point and properties of the product. Colorants are used to change the color of zirconia ceramics, while fluxes can lower the melting point of zirconia and improve its fluidity in the molten state.
3, Forming
+
-
There are various methods for forming zirconia ceramics, including dry pressing, injection molding, isostatic pressing, injection molding, hot die casting, and casting.
Dry pressing: The mixture is formed by pressure pressing.
Injection molding: Inject the mixture into the mold, cure it for a certain period of time, and then take it out for molding.
Isostatic pressure forming: Using high pressure to fill the mixture into the mold and shape it. This method has a significant impact on the dimensional accuracy and surface quality of zirconia ceramics.
Grouting molding: including physical dehydration process and chemical coagulation process. Physical dehydration removes water from the slurry through the capillary action of porous gypsum molds, while chemical coagulation process is caused by the dissolution of CaSO4 on the surface of gypsum molds, which generates Ca2+and increases the ionic strength of the slurry, resulting in flocculation of the slurry. Under the action of physical dehydration and chemical coagulation, ceramic powder particles deposit and form on the gypsum mold wall.
Hot die casting: Ceramic powder is mixed with a binder (paraffin) at a high temperature (60-100 ℃) to obtain a slurry for hot die casting. The slurry is injected into a metal mold under the action of compressed air, cooled under pressure, and demolded to obtain a wax blank. The wax blank is dewaxed under the protection of inert powder to obtain a green blank, which is then sintered at high temperature to form porcelain. This method produces green bodies with precise dimensions, uniform internal structure, minimal mold wear, high production efficiency, and is suitable for various raw materials.
Casting molding: Mix ceramic powder with a large amount of organic binders, plasticizers, dispersants, etc. to obtain a flowable viscous slurry. Add the slurry to the hopper of the casting machine, control the thickness with a scraper, and flow out to the conveyor belt through the feeding nozzle. After drying, the film blank is obtained.
4, Sintering
+
-
Sintering is the process of combining zirconia ceramic powder particles at high temperatures to form a dense ceramic body. The sintering process has a significant impact on the properties of zirconia ceramics. The control of temperature, time, and atmosphere is crucial during the sintering process. Usually, the sintering temperature of zirconia ceramics is around 1600 ℃, and the sintering time depends on the size and thickness of the product. The sintering atmosphere is generally oxygen or nitrogen to prevent the reduction of zirconia.
5, Post processing & Finished product inspection
+
-
After sintering, zirconia ceramics need to undergo post-treatment to improve their properties and aesthetics. Post processing includes steps such as cutting, polishing, and polishing.
Cutting: Cut the sintered zirconia ceramic product into the desired size.
Polishing: Grinding the surface of a product to make it smooth.
Polishing: Using polishing agents and polishing machines to polish the surface of the product, giving it a high degree of gloss.
After completing the above process flow, it is necessary to inspect the zirconia ceramic products to ensure that their performance and quality meet the requirements. The inspection content includes dimensional accuracy, surface quality, hardness, bending strength, etc. Only through strict inspection can the performance and quality of zirconia ceramic products be guaranteed.
Product Quality Certification

Frequently Asked Questions
Can you provide free samples?
+
-
Yes, we can provide it, please send us specific needs, we will choose the right product sample.
What is the payment method?
+
-
30% paid for deposit by T/T after palcing order,the balance to be paid before shipment.
Are you factory?
+
-
Yes. sure
Hot Tags: Zirconia Alumina Tube, China, manufacturers, suppliers, factory, customized, buy, Alumina Ceramic Packing Ball, Alumina Lining Tile, Alumina Ceramic Grinding Balls, Zirconia Alumina Balls, irconia Ceramic Beads, Mosaic Tiles
Previous
alumina ceramic cylinderNext
Alumina Ceramic TubeSend Inquiry






