Our target is to consolidate and improve the quality and service of existing products, meanwhile constantly develop new products to meet different customers' demands for Rubber Ceramic Conveyor Belt, Alumina Ceramic Lined Elbow, 92% Alumina Ceramic Ball. We uphold the core value of 'customer service as the center' with a group of highly enterprising professional and technical personnel, and implement modern scientific management in an all-round way to continuously enhance the comprehensive capabilities of the company. Our company adopts advanced modern management system to achieve seamless communication and collaboration between various departments. We will work hand in hand with new and old customers based on the principle of honest service to create brilliance in the face of opportunities and challenges and make new contributions to the construction and development of the industry under the environment of active global economy.

WEARING COMPOUND

Wear Compound is a high-performance coating that is designed to protect and extend the life of metal components in a variety of industrial applications. Whether you work in mining, manufacturing, or construction, these compounds can help you reduce downtime and improve efficiency. With their hard-wearing properties and resistance to abrasion, Wear Compounds are truly a valuable investment for any business. So why wait? Start using Wear Compound today and experience the benefits for yourself!

DIRECTIONS FOR USE- Surface preparation:

Proper surface preparation is critical to the long term performance of this product. The exact requirements vary with the severity of the application, expected service life, and initial substrate conditions.

1. On all vertical or overhead applications, tacking welding expanded metal mesh onto the metal substrate is strongly recommended prior to application of Wearing Compound.

2. Clean, dry, and abrade application surface. The more thorough the degree of surface preparation, the better the performance of the application. If possible, it is recommended that the surface be grit blasted to a Near White Metal(SSPC-SP10/NACE No.2) Standard. For less severe applications, roughening the surface with hand tools is suitable.

Mixing:

1. Measure 2 parts resin to 1 part hardener by volume or weight on a clean and dry mixing surface and mix together until uniform in color.(If resin and hardener temperatures are 15 ℃/60℉ or below, preheat resin only to about 21℃/90℉ but not to exceed 37℃/100℉) .

2. Immediately after abrasive blasting, rub a thin layer of material onto the surface to "wet" for good adhesion.

Application:

1. Apply fully mixed material to the prepared surface.

2. Initially apply the material in a very thin layer to "wet" out the surface and avoid air entrapment.

3. At 25℃/77℉, the working time is 30 minutes. Working and cure time depend on temperature and mass; the higher the temperature, the larger the mass, the faster the cure.

4. Functional cure time is 7 hours at 25℃/77℉. 5.CAUTION! Use approved, positive-pressure, supplied-air respirator when welding or torch cutting near cured compound. Use approved self-contained breathing apparatus when burning, welding, or torch cutting indoors near cured compound. Use approved respirator for dusts and mists when grinding or machining cured compound.

FAQ

Q: What is Wearing Compound, and what products can it be used on?

A: It is a specialized product used to prevent and repair damage in industrial equipment. It can be applied to a wide range of products, including valves, pumps, and pipes, among others.

Q: How does it work, and what are its benefits?

A: Wear Compound utilizes advanced technology to create a protective layer over damaged areas. This layer provides exceptional wear resistance, reducing the risk of further damage and extending the lifespan of your equipment. Wear Compound is also easy to apply, making it an accessible and effective solution.

Q: Is Wear Compound environmentally friendly?

A: Yes! Wear Compound is a non-toxic and eco-friendly solution that does not harm the environment. It is a safe and reliable product that is widely used in various industries.

No matter new customer or outdated client, We believe in extensive phrase and trusted relationship for PVC for Pipe Compounds Manufacturer Fittings. We have now deep cooperation with hundreds of factories all over China. 'Meticulous manufacturing, sincere service' is the principle that we have always pursued, and striving for first-class products is our constant goal. Welcome customers from home and abroad to discuss business.

Hot Tags: wear compound, China, manufacturers, suppliers, factory, customized, buy, Refractory Materials, High Alumina Ceramic Grinding Cylinder, Mosaic Tiles, RBSIC Cylones, AB Glue Mixing Tube, Wear Compound