High Alumina Ceramic Tiles
Description
Technical Parameters
Introduction
Alumina wear-resistant ceramic lining board is a kind of low abrasion, high density, high hardness of the ceramic chemical new material, mainly alumina (AL2O3) as the main body of the material, after high temperature of 1700 ° C to burn up, widely used in thermal power, steel, chemical, cement and other industries, the coal, transporting, pulverizing, ash discharge and dust removal system and so on all wear large mechanical equipment use, Products of different purity (defined by the content of alumina) can be selected according to different needs.
Welding type
Welding wear-resistant ceramics are fixed by welding or gluing. After the wear-resistant ceramic is installed on the surface of the equipment, the application range of the wear-resistant ceramic is greatly expanded. It is suitable for the abrasion resistance of the pneumatic conveying systems under severe working conditions such as high temperature and impact. The high-temperature resistance can reach 800 ºC.
Product features
High hardness Superior abrasion and impact resistance Corrosion and chemical resistance Light weight Easy installation by epoxy resin or bolt Improve your working environment-noise, vibration and safety.
Aapplications Processing equipment: Pharmaceutical clean rooms/Food processing plants/Grain handling/Mineral processing/Cement manufacturing/Chemical processing/Large Cyclones/Coal-fired power plants/Steel Mills/Asphalt Plants/Petrochemical plants/Pulp and paper mills Wear Protection ceramic Linings are used throughout Mineral Processing to protect the steel surfaces of equipment from wear and corrosion. They are used on a range of equipment including pipes, tanks, chutes, pumps, flotation cells, thickeners, launders and feed spouts or chutes
Key benefit
Alumina mill linings (alumina bricks and tiles) are the perfect solution for protecting grinding ball mills from wear, as they allow for a constant use over an extended period of time without any routine maintenance.
High strength, high density, high abrasion, entire specification, strong practicability. It can be used for ball mill, mixing mill, vibration mill, sand mill, etc.
Techincal data
| ITEM/PRODUCT | HA 92 | HA 95 | ZTA |
| Al2O3(%) | 92±0.5 | 95±0.5 | 76±0.5 |
| ZrO2(%) | 20 | ||
| Bending strength(MPa） | ＞220 | ＞280 | ＞400 |
| (MPa1/2) Fracture thoughness | ＞3.6 | ＞3.9 | ＞4.5 |
| Rockwell hardness(HRV) | ＞82 | ＞88 | ＞90 |
| Wear volume(cm3) | ＜0.5 | ＜0.3 | ＜0.15 |
Commen Size
| Part of Ceramic Weldable Tiles is as following. | ||
| 100*50*10 | 100*100*10 | 100*100*30 |
| 150*100*30 | 120*80*10 | 150*50*12 |
| 100*100*25 | 100*100*20 | 120*80*20 |
| 150*50*20 | 150*50*12 | 150*100*25 |
Hot Tags: High Alumina Ceramic Tiles, China, manufacturers, suppliers, factory, customized, buy, White Tabular Corundum, Ceramic Mocaic Tiles, Zirconia Alumina Balls, Mosaic Tiles, Alumina Lining Tile, Alumina Ceramic Grinding Balls
Previous
92% Alumina Gringding BallNext
Alumina Ceramic TileSend Inquiry
