News

Are Alumina Ceramic Tubes Especially Toxic At High Temperatures?

Alumina ceramic tube is a very common use, but many people may not normally see a product, in many high temperature forging industry will be used i...

view more

Get Feedback From Wear Resistant Alumina Ceramic Liner Customers

CUSTOMERS WILL SATISFY WITH OUR PROJECT

view more

Wear Resistant Alumina Ceramic Equipment

We have finished some wear resistant equipment, will send to customers soon.

view more

Talk About Why The Surface Of Alumina Ceramics Will Blacken?

The only disadvantage is that the glaze is more prone to blackening,and this will affect the normal use of alumina ceramics.

view more

Teach You How To Polish Alumina Ceramics?

After the alumina ceramic is sintered and cooled,it does not mean the end of the product processing.Some products still cannot meet the application...

view more

What Are The Toughening Methods For Alumina Ceramics?

The precipitation method refers to the precipitation of various forms of Al3+ionic aluminum hydroxide in the raw material liquid by introducing an ...

view more

Mechanism Of Sintering Of Alumina Ceramics

The additive that can form a limited solid solution with alumina has a greater cooling effect than the additive that forms a continuous solid solut...

view more

Talk About Low-temperature Sintering Technology Of Alumina Ceramics

The current low-temperature sintering techniques of various alumina ceramics can be summarized,mainly from three aspects of raw material processing...

view more

On The Development Trend Of Alumina Ceramics

The density of ceramic fittings is higher than that of alumina ceramics.The density of alumina ceramics is 3.5,the density of zirconia ceramics is ...

view more

Talk About Where Is The Main Application Of Alumina Ceramics

Ordinary alumina ceramics are divided into 99 porcelain,95 porcelain,90 porcelain,85 porcelain and other varieties according to different Al2O3 con...

view more

Analysis Of The Wear Resistance Of Alumina Ceramics And Zirconia Ceramics

The density of alumina is only 3.9-4.0.Therefore,choosing zirconia as the grinding medium will produce greater shear force and improve the grinding...

view more

The Requirements Of Additives For The Injection Molding Technology Of Alumina...

The injection effect of resin-based binder is good,because when using the resin-based system,care should be taken to maintain the viscosity and to ...

view more