Analysis Of The Wear Resistance Of Alumina Ceramics And Zirconia Ceramics
Apr 13, 2020
Leave a message
It is understood that there are many types of alumina ceramics and zirconia ceramics.So,what is the difference between the wear resistance of alumina ceramics and zirconia ceramics? The editor of alumina ceramics tells you specifically:
1.Natural alumina is corundum with Mohs hardness of 9 and cubic zirconia with Mohs hardness of 8.5.Therefore,in terms of pure alumina and zirconia,the hardness of alumina is higher and it is more wear-resistant.
2.However,alumina ceramic is a mixture,which is artificially blended and then sintered,not pure and brittle corundum.Therefore,depending on the alumina content of the ceramics,some manufacturers have 95% alumina ceramics,97% alumina ceramics,99% alumina,99.7% alumina ceramics and other ceramics.The hardness of zirconia ceramics is also very high.
3.If the grinding media material working under the centrifugal force is preferably zirconia,its monoclinic density is 5.85.The density of alumina is only 3.9-4.0.Therefore,choosing zirconia as the grinding medium will produce greater shear force and improve the grinding efficiency.
4.If it is used as the material of grinding pots or bearings,it is better to choose high-purity alumina ceramics with higher hardness.
