White Tabular Alumina
video

White Tabular Alumina

White tabular alumina is a kind of pure sintered corundum that does not add any additives such as MgO, B2O3 and so on. It has a coarse and well-developed α-Al2O3 crystal structure. The content of Al2O3 is more than 99%.
Send Inquiry
Chat Now

Description

Technical Parameters

20220816112628701ba292354145459b2ccb2936770f1c

Products Description

 

White tabular alumina is a special type of alpha alumina product made by sintering high-purity alumina powder at temperatures above 1900 ° C through a strictly controlled rapid sintering process, without the need for any sintering aids. During the rapid high-temperature sintering process, closed spherical pores are formed, which exhibit excellent thermal stability and structural strength. Unlike molten alumina (produced in an electric arc furnace at 2000 ° C+) or ordinary calcined alumina (sintered at 1000-1200 ° C), It achieves the optimal balance of high density, low porosity (≤ 5%), and excellent crystal integrity.

 

Advantages

 

1. High fire resistance and thermal stability
The melting point of white tabular alumina is 2050 ° C, with zero low-temperature melting phase, allowing it to be exposed to high temperatures of 1800 ° C for a long time without softening or deformation. Its low porosity and closed spherical pore structure provide excellent thermal volume stability, minimal reheat shrinkage, and can prevent cracking or peeling under extreme thermal cycles.
2. Thermal shock resistance
It can withstand repeated heating cooling cycles in industrial furnaces without causing structural damage.
3. High density and mechanical strength
Its bulk density is ≥ 3.50 g/cm ³, compressive strength exceeds 150 MPa, and it has excellent bearing capacity and wear resistance. Its Mohs hardness is 9, ensuring resistance to mechanical wear and impact in harsh industrial environments.
4. Slag resistance and corrosion resistance
Its high purity (≥ 99% aluminum ₂ O3) and dense microstructure make it inert to acidic, alkaline, and slag corrosion. It is superior to ordinary alumina refractory materials in resisting chemical erosion from steel slag, cement clinker, and molten metal, and extends its service life in corrosive industrial environments.
5. Low porosity and high purity
Controlled sintering can achieve a porosity of ≤ 5% and a moisture content of ≤ 1.5%, preventing the infiltration of molten materials or corrosive gases. Its ultra-low impurity content (SiO ₂ ≤ 0.20%, Na ₂ O ≤ 0.40%) ensures consistent performance and avoids adverse reactions with processed materials. 

 

 

Application

 

White tabular alumina can be used as the main component of aluminum carbon, aluminum magnesium carbon, magnesium aluminum carbon, magnesium spinel, and aluminum chromium refractory bricks; It can also be used as a component rich in alumina in high alumina amorphous refractory materials. Applied to:
1. Steel and Metallurgy
It is suitable for working lining and sliding gates of blast furnaces, hot blast stoves, steel ladles, and can withstand the impact of molten steel and slag corrosion.
2. Ceramics and Glass
Used for high alumina amorphous refractory materials, kiln furniture, and high thermal conductivity ceramic substrates. It improves the fire resistance and thermal shock resistance of ceramic kiln lining and glass furnace components.
3. Petrochemicals and Incineration
Suitable for lining high-temperature converters, cracking furnaces, and waste incinerators, it can resist corrosion from high-temperature flue gas and chemical media.
4. Foundry industry
Applied to precision casting refractory materials, such as investment casting shells and crucibles, to ensure dimensional stability at extreme temperatures.
5. Advanced materials
Utilizing its excellent dielectric properties and mechanical strength, it is used for electrical insulators, electronic component substrates, and high-performance wear-resistant materials.

 

 

Techinical Data

 

CompositionType

Al2O3%

SiO2%

Na2O%

Fe2O3%

Bulk density (g\cm3)

Porosity%

Moisture%

MA-35

≥99.2

≤0.20

≤0.40

≤0.10

≥3.50

≤5.0

≤1.50

Typical value

99.5

0.1

0.36

0.08

3.55

3.6

1

 

 

 

 

 

 

FAQ


Q1: What is the difference between white tabular alumina and calcined alumina?
A1: White tabular alumina is sintered at 1900 ° C+without additives, forming large plate-like crystals with closed pores and excellent thermal shock resistance and fire resistance. Calcined alumina is fired with sintering aids at 1000-1200 ° C and has the characteristics of fine grains and high porosity, making it suitable for medium temperature applications.
Q2: Can it be customized for specific applications?
A2: Yes, it is. We offer customized particle sizes, low sodium formulations (Na ₂ O ≤ 0.20%), and ultra-high purity grades (Al ₂ O ∝ ≥ 99.9%).
Q3: What are the minimum order quantity and delivery time?
A3: The minimum order quantity is 1 ton; Standard grades are shipped within 7-15 days, while customized formulas are shipped within 15-30 days. Free samples (1kg) can be used for quality testing (freight collect).
Q4: What is the packaging like?
A4: Packaged in 25kg waterproof bags or 1-ton bulk bags, stored in a dry and ventilated warehouse to avoid moisture absorption. Proper storage can maintain its low moisture content and prevent clumping.
 

 

 

20220816112641fbf4ce969ed742a8948655608b532260

Hot Tags: white tabular alumina, China, manufacturers, suppliers, factory, customized, buy, Tabular Alumina, Tabular Alumina Corundum, Bauxite, Alumina Cement, Refractory Materials, White Tabular Alumina

Send Inquiry