What Are The Types Of Wear Resistant Ceramic Pipelines?

1. Corporation cast composite ceramic pipeline

The centripetal ceramic pipeline of centrifugal casting is a composite pipe manufactured by "self-burning high temperature synthesis-high-speed centrifugal technology", which forms a uniform, dense and smooth ceramic layer and transition layer at high temperature and high speed.

2. Patching wear -resistant ceramic pipeline

The wear -resistant ceramic pipeline of the patch is to adhere the alumina ceramics to the inner wall of the pipeline with high temperature resistant and powerful sticky glue. The production process is simple and the cost is high. The use temperature generally cannot exceed 100 degrees and is not suitable for pipelines.

3. Point welding card -type wear -resistant ceramic pipeline

Point welding card -resistant abrasion -resistant ceramic pipes are used to adhere the alumina ceramics of the middle with high temperature resistant and strong adhesive gloss on the inner wall of the pipe. At the same time, the ceramic is welded firmly with the small hole through the small hole. In order to protect the solder joints, a ceramic cover is spin on it. Each piece of porcelain is not only inserted from each other, but each piece of porcelain forms a trapezoidal angle, which makes the porcelain tightly connected and seamless; when the last piece of a circle is embedded, the mechanical self -self of the porcelain block forms a 360 ° mechanical self. Locking (this technique was used in Chinese bridge construction projects a few centuries). The production process of this product is relatively complicated, the production cycle is long, and the cost is higher.

4. All -in -one wear -resistant ceramic pipeline

The integrated formation is to fired the ceramic pipe parts as a whole, and the special filling material is poured in the inside of the steel pipe. The inside of the pipeline is smooth and sealing, and has good wear resistance and corrosion resistance.