Activity of activated alumina and how to choose catalyst

Apr 29, 2022

Leave a message

The primary targets for characterizing the activity characteristics of activated alumina are pore volume and specific surface area. When these two parameters are high, the activity is generally considered to be high. People have paid more attention to the active aspect. Generally, the preparation of raw materials, the ratio of raw materials during molding, the selection of aids, the molding process, drying and activation roasting processes are strictly controlled to ensure and improve the activity of activated alumina.


The purpose of the selectivity of the catalyst is mainly related to its carrier. Therefore, when talking about the activity of activated alumina, it is often necessary to talk about the selection of catalysts using activated alumina as a carrier. Because the activity and selectivity of the catalyst are directly related to the carrier. The selectivity of the catalyst is directly related to its pore size distribution, which in turn is directly related to the pore size distribution of the support. Therefore, the activated alumina as a carrier must have a reasonable pore size distribution.


Generally speaking, catalysts with high activity are not necessarily selective. A catalyst with both high activity and good selectivity is required to be a product with relatively large pore volume and surface area and reasonable pore size distribution.


The problem of pore structure has been known and studied for a long time, but the attention is far less than that of pore volume and specific surface area. With the improvement of people's awareness and the actual needs of catalysts, it is inevitable to develop the research on the pore structure of activated alumina to improve the quality of special alumina. Now, people hope to have tactile alumina with reasonable pore size distribution, but there are not many existing products in China that can meet the requirements, and there is still a long way to go from the requirements of the catalysis industry. Therefore, focusing on and developing pore structure research is the demand for the development of special alumina, especially activated alumina.


So how to carry out the study of pore structure? We know that the pores of the carrier have several types of small pores, mesopores, macropores and their cross-linking with each other. Different catalysts require different pore structures. Generally, the macropores (micron-scale) of activated alumina are the channels through which the reacting substances enter the interior of the catalyst; while the small or mesopores with rich surface area are where the catalytic reaction occurs. 


Small pores or mesopores are generally related to the properties of the material. Therefore, in order to prepare a catalyst carrier with a qualified pore structure, the first step is to prepare a qualified material; and the preparation of the material-alumina hydrate, such as pseudo-boehmite, is related to the material used to prepare the material, the preparation process, and the preparation process. The selection and dosage of auxiliary agents are related. The material determines the pore structure of the carrier.


In a word, the high added value of special alumina with high added value is conditional on excellent quality; excellent quality is a necessary condition for high added value and high efficiency. For activated alumina, as mentioned above, there must be necessary conditions such as good activity and reasonable pore structure. The development prospects of special alumina can be summarized in a simple sentence, that is, high quality - high added value - high efficiency - great development.


Send Inquiry