A Brief Introduction Of 10 Sintering Processes For Alumina Ceramics-5
Oct 19, 2020
Leave a message
5. Microwave heating sintering
Microwave heating sintering makes use of the interaction between microwave and ceramics because of the dielectric effect of sintering the ceramic interior and surface at the same time.Microwave sintering is different from other sintering methods, the hot gas flow is from inside to outside, which is conducive to the gas diffusion inside the billet.At the same time, microwave increases the activity of grain, makes it easier to migrate and promotes densification.
Compared with other sintering methods, microwave sintering can rapidly heat up and sintering, with uniform temperature field, low thermal stress and no pollution.The sintering temperature of microwave sintering is 100℃ to 150℃ lower than that of conventional sintering, and the sintering time is nearly one order of magnitude less than that of conventional sintering.Under the same condition, the density of microwave sintering is obviously higher than that of conventional sintering.Microwave sintering can sintered objects with complex shapes, and the sintered ceramics have small grains, good uniformity and good fracture toughness.

