How To Deal With The Defects In The Construction Process Of Alumina Ceramics

Before the alumina ceramics are applied to the steel parts,the steel parts are not treated properly,some are not complete in removing rust,and some are not smooth in appearance.In order to obtain outstanding construction effects,the steel parts should be pretreated by sandblasting.It is also necessary to scrub the surface of the steel parts with acetone,and then reach a certain role of degreasing and degumming.

The ratio of the wear-resistant ceramic glue is wrong.The ratio of different glues is different.Strict control is required.If the ratio is not suitable,the predetermined viscosity cannot be reached; the wear-resistant ceramic glue is not evenly applied,so it causes non-stick glue.Or the place with too little glue is simply dropped.After the construction of alumina ceramics,use a rubber hammer to lightly tap it,and the construction surface should be flat.

Alumina ceramics must understand the working temperature before construction.Alumina ceramics can withstand a high temperature of 1000 degrees.Different temperatures must be selected for different temperature-resistant functions.Otherwise,the alumina ceramics will drop as the temperature rises.Ladies and gentlemen,you must choose experienced construction troops when you wear ceramics.Good wear-resistant ceramic construction can make a lot of sense.

When alumina ceramics are posted,the glue must be plump.The gaps are all squeezed with organic glue to ensure the bonding strength and do not fall.If large gaps are found,they can be repaired with mud-like wear-resistant glue.The operation is simple and the construction is convenient.To avoid the drop of alumina ceramics,it should be noted that there are mainly such points.